M18 FORCE LOGIC 6 Ton Knockout Tool

The Milwaukee FORCE LOGIC(tm) 6-Ton Knockout Tool makes boring hole making tasks faster, lighter and reduces user fatigue. At 40% lighter weight and with its compact right angle design for access into tight places, this tool is ideal for hole making projects.

EXACT punches and dies feature bright red crosshairs for precise alignment, slug removal ports for optimal slug removal, and a gripping surface designed to facilitate faster threading.

Power

The Milwaukee Knockout System was designed with one goal in mind: simplifying hole making, increasing speed and limiting fatigue. The M18 FORCE LOGIC 6 Ton Knockout Tool brings these advantages forward for service applications with increased power and 40% lighter weight.

This compact right angle knockout tool provides optimal clearance in tight spaces while minimizing operator stress and fatigue by restricting user movement. The Quick Connect Alignment System makes set-up simple without the weight of the tool, while repetitive punching with EXACT dies rated for mild steel or stainless steel with engraved cross hairs for accurate alignment and slug removal ports for optimal threading is accelerated.

HVAC system installers will love the ONE-KEY(tm) press tool, offering a flameless alternative to traditional brazing. It features an inline design and brushless motor for 20% longer run time per charge and faster cycle times, while REDLINK intelligence delivers unmatched press accuracy and dependability. Plus, with up to 50,000 cycles before calibration required, users can count on increased productivity throughout their projects.

The M18 FORCE LOGIC Press Tool with ONE-KEY is the industry’s first press tool to offer remote tracking, management and lockout capabilities. It’s the smallest, most intelligent press tool available and boasts a cutting-edge brushless motor for 20% longer run time per charge and 10% faster cycle time compared to other competitors.

With REDLINK intelligence, this press tool automatically cycles and performs a pre-press battery check to prevent partial presses while providing the highest level of press accuracy and dependability. It also visually indicates when calibration is required after each press cycle.

Setting Up the M18 FORCE LOGIC 6 Ton Knockout Tool

To set up this tool, mark where you need the punch and die to go (a Milwaukee Inkzall is ideal), then attach them on opposite sides of the tool. Next, use a straight edge to create crosshairs and line them up on both punch and die so that your hole will be precisely where desired.

Ease of Set-Up

Ease of Set-Up

The Milwaukee POWER M18 REDLITHIUM XC 10-ton knockout tool features a right angle design that makes it easier to maneuver in tight places, as well as reduce fatigue by speeding up job completion time.

It boasts the largest punching capacity in its class, making it perfect for applications where space is at a premium. Its POWER M18 REDLITHIUM battery provides ample power and run-time to tackle various tasks – from punching up to 4 inches into mild steel plates to drilling holes in electrical boxes, pipe and conduit.

Quick Connect Alignment System simplifies setup by eliminating the weight and clutter of traditional tools, making it simpler than ever to get the most from your M18? Force Logic? Knockout Tools.

EXACT(tm) punches and dies have large ID markings to make selection and use a breeze, while their tooth geometry helps deliver optimal slug removal in less time than you might expect. Furthermore, these dies feature Milwaukee POWER M18 REDLITHIUM’s most prominent feature – an integrated LED light that helps spot and eliminate slugs before they start.

This powerful, user-friendly, and lightweight tool will be a hit in any shop or garage. It boasts impressive features such as its 10000 psi hydraulic pump that requires no setup and provides 3X the flow rate of competitors. Plus, there’s a quick-release hang hook so you can hang the tool on shelves or buckets; plus its in-line design provides improved comfort and mobility.

EXACT Punches & Die Sets

Milwaukee’s EXACT Punches & Die Sets provide accurate alignment in mild and stainless steel to make your job easier. Their vivid red cross hairs ensure accurate positioning while their slug removal ports ensure efficient slug removal. Plus, these tools boast a gripping surface to make threading fast and effortless.

These EXACT sets come in a range of sizes, from 2-1/2″ to 4″. Each set includes one punch and die assembly.

The knockout driver’s draw stud attaches to the end of the tool and pulls a sharp-edged punch from one side of sheet metal toward its die on the other, creating an accurate hole. These tools are compatible with various nut, bolt and screw sizes including M18? Force Logic? Series.

A hallmark feature of the Milwaukee Knockout System is that each tool streamlines hole making, improves speed and limits fatigue for users. The new 6 Ton Knockout Tool extends these benefits into service applications while being 40% lighter weight than comparable tools for greater ease of use and portability.

This compact right angle design provides superior clearance in tight spaces for improved safety and access. Compatible with all Milwaukee Exact punches and dies, you can find the ideal combination to tackle any job at hand.

These tools also feature the Quick Connect Alignment System, providing effortless set-up without the weight of the tool and speeding up repetitive punching. Once aligned, punch and die assembly snap into place for a faster knockout experience.

EXACT punches and dies are designed for both mild and stainless steel applications, featuring pre-drawn crosshairs for precise alignment. Plus, they boast slug removal ports that can be removed with minimal effort as well as notches on the punches that facilitate threading.

EXACT punches and dies feature large size ID markings on their teeth to quickly select the appropriate size for any job. Plus, their slug removal ports are located right at their teeth for easier slug removal without needing spacers – adding value to your job!

System Compatibility

Milwaukee FORCE LOGIC Knockout Tools have been engineered to the nth degree to enhance upon their predecessors by simplifying hole making, speeding up the process and relieving users of tired fingers. As a result, these tools have set new benchmarks in accuracy, durability and productivity.

The M18 FORCE LOGIC 10 Ton High Capacity Knockout Tool is the best of the lot and offers great value with EXACT punches and dies designed for both mild steel and stainless steel applications. Vivid red cross hairs help with alignment while the grip surface on the punches allows faster threading and smoother operation. Powered by the latest generation of the popular M18 battery and charger, this powerful tool will surely put a dent in your toolbox!

At this great price, you can get the M18 FORCE LOGIC Knockout Tools.