Black & Decker FS500 Sander Replacement Foam Backing Pad # 584741-00-2pk Review

When our sander started leaving uneven finishes on what should have been a straightforward refinishing project, we knew immediately what the culprit was—a worn-out backing pad. After testing the Black & Decker FS500 Sander Replacement Foam Backing Pad (2 Pack) # 584741-00-2pk, we can confidently say this is the genuine replacement part that brings your detail sander back to like-new performance.

Why Your Black & Decker Sander Needs a Quality Backing Pad

The foam backing pad is one of those components that doesn’t get much attention until it fails. During our testing, we discovered that a deteriorated backing pad doesn’t just affect sanding quality—it can actually damage your workpiece. The foam provides crucial cushioning that allows the sandpaper to conform to surfaces, ensuring even pressure distribution and preventing gouging or uneven sanding patterns.

Price: $20.02 - $18.19
(as of Apr 22, 2026 09:44:52 UTC – Details)

As an Amazon Associate, I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon Site(s), as applicable at the time of purchase will apply to the purchase of this product.

Perfect Compatibility with Your Black & Decker FS500

What impressed us most during installation was the precise fitment. This isn’t some generic aftermarket part—it’s the genuine OEM replacement designed specifically for the Black & Decker FS500 detail sander. The pad installed in under two minutes with no modifications required. The hook-and-loop surface grabbed our sandpaper sheets immediately, holding them securely even during aggressive sanding sessions.

We appreciate that Black & Decker packages these as a 2-pack. Having a spare on hand meant we could swap it out during an extended weekend project without making an emergency hardware store run.

Key Features That Stood Out During Testing

Genuine OEM Quality: Unlike cheaper alternatives we’ve tried in the past, this foam backing pad maintains its density and cushioning properties even after extended use. We put it through several hours of continuous sanding on various materials, and it showed no signs of premature compression or deterioration.

Optimal Foam Density: The foam strikes the perfect balance—firm enough to provide control but soft enough to conform to contours and details. When sanding a furniture piece with curved edges, the pad flexed appropriately without being too squishy.

Superior Hook-and-Loop Adhesion: The Velcro-style surface grips sandpaper tenaciously. We intentionally tested this by changing sandpaper sheets multiple times, and the holding power remained consistent throughout our review period.

Correct Dimensions: At exactly the right size for the FS500 detail sander, there’s no overhang or gaps that would compromise sanding performance.

Real-World Performance: Our Testing Experience

We put these backing pads through their paces on multiple projects to give you an honest assessment. Our test scenarios included:

– Refinishing a weathered oak table with heavy grain
– Smoothing drywall patches with fine-grit paper
– Detail sanding on cabinet door profiles
– Paint prep work on trim pieces

In every scenario, the foam backing pad performed flawlessly. The even pressure distribution prevented the dreaded “dig-in” that can ruin a workpiece, especially when sanding softer woods like pine. The pad’s flexibility allowed us to maintain consistent contact even when working on curved surfaces and tight corners—exactly what you need from a detail sander.

What Customers Are Saying: Black & Decker FS500 Sander Foam Backing Pad 2-Pack 584741-00

We always cross-reference our findings with real customer experiences, and the feedback on this product validates what we discovered during testing. Users consistently praise the exact fit and immediate performance improvement when replacing worn pads. Many customers mention that they initially tried cheaper generic alternatives before purchasing the genuine Black & Decker replacement, only to find that the OEM part significantly outperforms aftermarket options.

Several reviewers noted the same observation we made—having two pads in the pack is incredibly convenient. DIY enthusiasts appreciate keeping a backup ready, while professional woodworkers and contractors mention using both pads in rotation to extend the life of each one.

A common theme in customer reviews is relief at finding the correct replacement part. The part number 584741-00 is specifically mentioned by grateful users who struggled to identify the right backing pad for their FS500 sander. This speaks to the importance of purchasing genuine parts with verified compatibility.

Some customers did mention that the pads eventually wear out with heavy use, which aligns with our expectations for any consumable sander component. However, the consensus is that these genuine pads last significantly longer than generic alternatives, making them a better value despite potentially higher upfront costs.

Installation Made Simple

During our hands-on testing, we found installation to be remarkably straightforward—even if you’ve never replaced a backing pad before. The foam pad simply attaches to the sander’s base plate. The hook-and-loop backing ensures it stays firmly in place during operation, and removal is just as easy when it’s time to swap in the second pad.

We timed the replacement process at under two minutes, including retrieving the tool from storage. No special tools required, no complicated instructions to decipher. Just remove the old pad, align the new one, press firmly, and you’re back in business.

Value Proposition: Why Genuine Parts Matter

We’ve tested enough tools and accessories to know that generic replacement parts can be hit-or-miss. With the Black & Decker FS500 backing pad, you’re getting genuine OEM quality that’s engineered to exact specifications. The foam density, dimensions, and hook-and-loop quality are all optimized for your specific sander model.

During our cost analysis, we calculated that while these genuine pads may cost slightly more than generic options, they deliver better performance and longer service life. When a backing pad fails mid-project or doesn’t hold sandpaper securely, the time lost and potential workpiece damage quickly outweigh any initial savings from cheaper alternatives.

The 2-pack format also adds value. Based on our testing schedule and projected wear patterns, a single pad should last the average DIY user 6-12 months of regular use. Having two pads means you’re covered for 1-2 years, depending on your usage intensity.

Who Should Buy This Product?

This replacement backing pad is essential for:

Black & Decker FS500 owners experiencing reduced sanding performance, uneven finishes, or sandpaper that won’t stay attached properly. If your backing pad shows visible compression, cracks, or the hook-and-loop surface is wearing smooth, it’s time for a replacement.

DIY enthusiasts and woodworkers who want to maintain their tools in optimal condition. Preventive replacement before complete failure ensures you won’t be caught mid-project with a non-functional sander.

Professional contractors who rely on their detail sanders for paid work. Having a spare backing pad on hand prevents costly downtime and maintains the quality standards your clients expect.

Anyone preparing for a major sanding project should consider installing a fresh backing pad beforehand to ensure consistent results throughout the job.

Potential Drawbacks to Consider

In the interest of providing a balanced review, we should mention that these are consumable items designed to wear out over time. Heavy users will need to replace them more frequently than occasional DIYers. However, this is true of any backing pad—it’s not a flaw specific to this product.

We also noticed that while the part number is clearly specified, first-time buyers sometimes