12 -Tournevis MILWAUKEE 10 en 1 TEST COMPLET – Milwaukee 10 in 1 Ratcheting Multi-Bit Driver Review

Hello everyone ! Today, we did a review of screwdriver 10 in 1 from Milwaukee Let's go ! 7 bits with a 1/4 hexagonal fitting The storage is a revolver style.
They are stored in the handle with a hexagonal shape There are only 6 slots so there is always a cap on the screwdriver It is used to get out the bit you need They are a bit 5.5 mm, Torx 20 Torx 15, PZ 2, PZ 1, PH2, and PH1 You can of course use the bits for the screw-gun The pawl has a rotation to the right or to the left
( The pawl have 20 notchs for a 360 ° rotation ) and a position where the ratchet does not turn anymore so it is used like a standard screwdriver A cutting notch that allows to strip wires and a hole to bend the cap of a cable Warning, it's not a screwdriver for electrician because it's not insulated length with a bit : 23 centimeters without bit 16 centimeters Weight : 312 gram Why 10 in 1 ? 7 caps + 1 stripper +1 hole to bend the cables and the hexagonal head to screw directly The tests The end caps are chrome to reduce the risk of corrosion I left a bit for 7 days in the water during thunderstorms times Result : no trace of rust.

Chrome looks good Wear of the caps Here is a close-up view of the cab I use the most : Torx 20 (The black marks are grease, I did mechanics shortly before) Of course it will not last forever but no premature wear after several months of use The machining is excellent, no excessive play between the cap and the screw head Resistance of the pawl mechanism I put an 1/4 socket adapter to 1/2 so I could use a socket to get the maximum grip and to be able to tighten strongly The objective is to see if the pawl mechanism is resistant to strong tightenings I force to the maximum, the pawl does not slam notches perfectly hold the effort It is very difficult to strip 0.75 mm ² cable because the diameter is too small.
So no problem with 1.5 mm² and 2.5 mm² It works well but personally I never use this function with this tool The disadvantages of this tool I’ve been using it for months and I have not noticed any negative points about the tool itself But the same tool sold in the USA has a limited warranty for life In France it is not the case, it's a pity So we have in France a classic manufacturer warranty, probably 1 year I think the advantages It replaces the most common screwdrivers It has a good grip The bits are perfectly maintained, it’s impossible to lose them The quality is excellent With a bit tip holder or adapters you can put almost anything in this screwdriver Conclusion I'm really happy about this tool.
There are several versions of this screwdriver What changes is the caps delivered with the size of the screwdriver Here is a tip, if you want to customize 100% of this tool Just buy these Milwaukee impact bits, which have exactly the same length and diameter And that's it! Blue thumb or red thumb, depending on how you enjoyed the video Meanwhile, get the best tools and work well ! See you soon on test-outillage.fr

As found on YouTube