18V Schlagschrauber der 1.000 NM Klasse VS Autobahnpoller | Bosch – Makita – Milwaukee | Verlosung

Hello tool fans, welcome to Gotools.tv, my name is Sebastian and today we are talking about impact wrenches and impact wrenches of the 1000 Newton meter class, but in the past we have always tested them a bit maltreated with metal and with metal. Today we do it with stone. That means we're going to maltreat this little friend here in this piece, namely our new beautiful highway bollard, which has been standing here on the highway for some time. Don't worry, there's a new one here. The old man needed ….. the old man is now on vacation.

And that's what we're going to take to our chests here, with the beautiful screws and these beautiful impact wrenches. Of course it's Friday. As always, there is still something to be won , namely this impact wrench, the 1000C. All we have to do is just discuss something with us in the comments below, what is best for you and of course your opinion and your feedback. This is now the beginning of the new opportunity we have, because in the old studio we never had the space for that kind of thing. And I was happy that we could finally put it in here, because I've actually had this beautiful bollard for six months. But I would never have the opportunity to use it for you. And today we're finally going to screw this sixteen concrete anchor straight into here. They say this part doesn't need a dowel. Ergo we screw it directly into concrete into the concrete of course with appropriate pre-drilling. And for that you need a little strength.

And I think 1000 Newton meters will be enough. But we may also see a difference. But now the devices take a look at us first. We have the Bosch GDS 18 V 1000 the Milwaukee M1ONEHIWF12 Makita DTW1002 Bosch GDS 18V 1000 C and the Bosch GTS 18V 1050 HC. We come to the subject of price. As always, we've sorted it all here and of course, as always, you can find the honest price comparison for the devices in the video description below . What prices do we have here? And please consider that we have 1000 and more Newton meters of attraction here. And the whole thing you get here in the range of around one hundred and ninety euros 1000 Newton meters That's awesome.

By the way, on the subject of the solo device below in the description you will find a price comparison, also various offers and sets. Of course, we have a price of around 230 240 euros for the two devices. Here we are already at 250 euros and here already at just over 300 .. But it must be added that the 1010 and the 1050 HC are completely new devices on the market and that the prices are not regulated. Therefore, if I am interested in them, take a look at the price comparison below. There you will find the current price. And now we're down to the Newton meter again. It's going to be pretty simple, because these three devices here each have 1000 Newton meters of tightening, concern, tightening and loosening torque is something else and we have thousands here. We have the 1010 and the Makita, each with around 1000 Newton meters. Then we have the 1050 here. The name says it all 1050 Newton meters. Milwaukee said oh nonsense, we'll do it differently. We have 1350 Newton meters of tightening torque here, so that the topic of price-performance could also shift to a minimum, or perhaps a minimum for you.

Because we had what I think was the second cheapest device in the test, but in any case the strongest device in the test at this point, let me say one more thing, namely this device here, the HC and the C. The two devices are now very, very new and with the devices it is so different to the others that they have a connectivity module or here we also have one, but that's not really worth mentioning. From my point of view, we'll come to that in a moment.

But here the connectivity module and there we can set a few things. Yes, it has to be turned on right away. But I would say, let's just take a quick look at all the devices. Because we actually want to look behind what they can do. Let's start with Makita. And all right , this is an extremely straightforward device, which does exactly what it is supposed to do. Shellac screws, they all do that. But here is really no frills. You can see that by the fact that you can hardly adjust anything here. You can do exactly two buttons, number one here, to get it working.

And down here we can adjust the speed. Speaking of speed, we're going to do the following for a moment and I'll show you the data of all devices in large format again , because all three devices each have three speed levels at which they beat at different speeds, exactly, here you can see that again Breakaway torque and so on and so forth. If you are interested in it. By the way, you could also click on the link above. There you will get even more information about the device and the comparison will be displayed again directly on the page. Not just here on or in the video. But look, that’s going to take a closer look. So we have the button at the front to set the number of beats or the speed accordingly . And what else we have, we have a lamp here and that's exactly what you have to say about the device.

It's very, very good. So it has rubber on it everywhere, because if you are traveling with 1000 Newton meters , then you will certainly have a tough job, which, by the way, needs to be mentioned again, does not know exactly why it is quiet and the comments, why is that so that the battery is stored here very strongly or very vibrantly. You can see that I am holding it here and that I am making the device here ….. it is not broken. That is what is wanted. But I wonder why the battery of all things is so swinging. So it is definitely not transferred to the battery. Of course, the classic 18 volt 5 ampere You can take a six for example battery from the Makita. So still the older generation and still the old generation of Makita. Now we come to Milwaukee, and Milwaukee has one thing that the market doesn't have.

We have a Bluetooth function here. We can connect the device to the mobile phone, but without any major setting options. That's why I'm not showing you this big now. No, you can just add the device to your inventory and do some other little gimmicks. But you cannot adjust the device directly on the device. Otherwise we can see that it is a little less rubberized.

Here in front rather metal and of course everyone here in front. That's not the topic, but the others are rubberized up here. By the way, very important All devices here are of course brushless. We no longer have a classic brushing device here , but all the devices that we look at today. Do they have this brushless motor. And here, too, I essentially only have two buttons, one at the front. We already know it to turn it on. Of course, just like with Makita here, a correspondingly strong light once here, Makita we had two here by the side.

This may be relevant for one or the other and we can then set the speed here below. Here also from one, two, three, four and then into Bluetooth mode and then it goes back again. Oh right, they even have a lot of speed levels. Whether this is relevant for you now, you have to decide whether you need such a strong gradation. I can not say that. I am curious. Just write that and in the comments whether this is really that relevant to you. So fine to classify that. Most of you will of course do it that way, right? I think that's how I would do it.

Full power in. Of course, that's not always the other option. And now we come to our 3 Bosch colleagues. Here it is that we have one thing in all three. We see that up here. These are biturbo brushless devices. That means, all three are intended for the Biturbo Brushless System or for a talking Pro Core battery. What does that actually mean? So we have I always translate that for myself personally into the following: We have a battery here that can deliver a lot of power, a lot of electricity. And we have an engine that is very happy to accept that.

With the old battery in the older generation, it is the case that not quite as much can be transferred and accordingly this maximum performance was not possible. We already have that here. But it also means that we can operate these three devices with only one Procore battery, we can operate them with 18 volts each. No problem. But the maximum power, i.e. the last 20 percent, is only available to the devices with the battery. By the way, I'd like to see which one again. It has to be at least 5.5 ampere hours. And exactly this one. You have to use that at least. There is also the smaller 4 series that would be usable here , but would not bring the full performance. So what now? The difference between the devices is actually relatively simple. First of all, we have the thousands here and that's 1010. That means, I already had this device in the video, by the way, I'll link it to you up here.

This is the case with the device, it has no connectivity function. That means, it's the same here as with Makita. The device can … I was about to say it can't do anything. Of course it's nonsense. The device does not have a connectivity function, but can of course be wonderfully used with hammer screws. The two devices have built-in. Is that this connectivity feature! And there we can adjust a lot. Maybe I'll show that again! But first about the device here, too. Here, too, we have a corresponding light. We can also turn that on here again. And by the way, I think that's extremely bright.

I don't know. You may see that. I have my finger here. It's really, really, really bright. And I believe of all of them. I just believe that. It is. Such things, which are to be measured, are relevant for you. I also like the comments when the light is very bright. I can set my three speeds here using the switch. One, two and three. And that's about it. What is important again, which I haven't even mentioned yet, is that we have all half-inch devices here, including the 1,000, 1,010 and so on.

These are all half-inch devices. But we have a device here that is three quarters of an inch. You have to consider again that the 1050 HC is a three-quarter inch device. So if you connect the 1,010 or 1,000 HC with the Bosch APP, you have this view and can set a lot there. For example, first of all the basic function For levels 1, 2 and 3 we can set the speeds. But you can also set the smooth running. That means that the speed increases slowly, that means more slowly, that I do not immediately go on it with full energy, but that I start with less energy and then after a few seconds with full energy. But there is also the option of installing the devices specifically for metric screws or wood construction screws or adjusting wood screws accordingly.

There are then different modes that you can set specifically for this. If you are interested in that I should go into detail again, then please write me in the comments. Today I would first specialize here in our concrete screw. But it is interesting that you can go into the devices more and more and more and more finely and adjust more and more to make it your tool for you. Hopefully you now know everything you want to know about the devices. And now it's our concrete block and of course we will first drill a few holes and then we'll see how they do.

How you drilled our sixteen holes so loosely and will now sink our concrete anchors here with the devices, if by the way , we should deal with fastening technology, write that down in the comments. I would be very interested in whether I should also make videos for something like that, because we will screw the whole thing in here completely without dowels. It cuts itself in concrete and lasts. There could probably be a train on it, but that's another story. Remember, when you do that it is really really loud and please protect your ears . Here we go. You have just seen how well it works and how much work it is for everyone, because we had a size 16 screw that we screwed directly into the concrete.

And in case you were wondering, why do you need so much strength here? We don't have a dowel and have to screw the 16 x 130 straight into the concrete. That means, the walls here have to cut into the concrete and you need a real bang in the hut for that. In that case and all that, by the way, they asked why I didn't use the 1050. Quite simply I always thought we are well equipped here. I really haven't found a suitable nut to try this out here, but I guess it's obvious this would have worked just as well. Interesting again, if you thought that you saw differences in different screwing behavior. That is also the case. But from my point of view it is very clear how well the screw was inserted , I also put it at the perfect angle.

And I don't think you can or will see a huge difference in this exact use case between these 4 screws. It will always be a little heavier, a little easier. It would of course have been easier with a dowel, but it might even have been possible to use a cordless screwdriver. I dont know. That's a topic for another video. I would be interested to know what is your opinion on these devices or what is the best device in your opinion? Write it in the comments and remember, there is still one to win and this is the 1010 with connectivity.

Let's get into what I think is the best for a moment. If you relate it to the pure impact screwdriver , then the best impact screwdriver of the four or five here is exactly the one that fits your battery system, because everyone here does a good job. There are no failures or anything like that was not to be expected and everyone is doing well.

If you want that last bit or the many setting options, it is very clear that the two here are probably the means of choice for you . But you can adjust the whole thing here . By the way, in case it didn't turn out right. You set the pair in your app in your Bosch app. The whole thing is also transferred here and always stays there. It's not that it has to be done anew every time. You do that once. You can leave the cell phone at home and then drive off and of course you still have all your settings in it. I am curious what your opinion is. I was happy that we did something with stone here and tried out a new technique. And in the sense, get on with your tools and see you next time..

As found on YouTube